STL FILES FOR 3D PRINTED CLIPS

LICENSE & USE DISCLAIMER By purchasing or downloading this file, you agree to the following terms: This STL file is for PERSONAL USE ONLY, NOT for resale, redistribution, sharing, or commercial use You may NOT sell, share, or distribute the digital file in any form You may NOT sell printed versions of this design Modifying the file does NOT grant resale or commercial rights All rights remain with the original creator Unauthorized reproduction or commercial use is prohibited. RECOMMENDED PRINT SETTINGS (Tested & verified) Material PETG (recommended) - NOZZLE: 0.6 mm (PREFERRED) - Nozzle Temperature: 240–250°C - Bed Temperature: 80°C - Flow Rate: 105% - Cooling Fan: 15% - Layer Height: ~0.32 mm - Wall Line Count: 3 - Infill: 20–30% (Gyroid or Cubic recommended) - Print Speed: Moderate (prioritize strength over speed) - Adhesion: Brim recommended This nozzle size provides the best strength and reliability for functional use. NOZZLE: 0.4 mm (ALSO WORKS) - Nozzle Temperature: 240–250°C - Bed Temperature: 80°C - Flow Rate: 105% - Cooling Fan: 15% - Layer Height: ~0.20–0.24 mm - Wall Line Count: 4 - Infill: 25–35% - Print Speed: Slightly slower than 0.6 - Adhesion: Brim recommended > Use this option if you don’t have a 0.6 nozzle — expect longer print times. ⚠️ NOTES - Ensure PETG is dry before printing - Avoid excessive cooling — PETG needs heat for layer bonding - If parts feel weak, increase wall count or infill - Strength is prioritized over surface finish for functional performance